AndoLabInstrumentsE610

6ch PZT Driver †

20 dB PZT driver with 6 channel
Closed loop control is capable with an adequate actuator

How to use †

This driver has 2 outputs, labelled with "PZT" and "MON". Connect "PZT" output to a PZT, and connect "MON" output to an oscilloscope or a data logger. "MON" port outputs one hundredth of "PZT" port voltage.

↑

Picture †

↑

Transfer Function †

Measured by Y. Oshima in 8th July 2020

↑

Output Noise †

Measured by Y. Oshima in 8th July 2020

↑

Notice †

This driver has 1st order low-pass with cutoff frequency 400 Hz. This driver adds ~~10 V~~ 50 V offset to output. The range of output voltage is from - 30 V to 110 V.
(2022.05.19. modified by Takano)

An RC filter is inserted just before the outputs:
(2021.11.11. added by Takano)

↑

Pin assignment: †