AndoLabInstrumentsE610
をテンプレートにして作成
[
トップ
] [
新規
|
一覧
|
検索
|
最終更新
|
ヘルプ
|
ログイン
]
開始行:
[[AndoLabInstruments]]
* 6ch PZT Driver [#i9ad571f]
- 20 dB PZT driver with 6 channel
- Closed loop control is capable with an adequate actuator
** How to use [#n2dbcf3f]
This driver has 2 outputs, labelled with "PZT" and "MON"....
** Picture [#kb74584f]
#ref(picture_PZTamp.jpg,,10%);
** Transfer Function [#x3355914]
- Measured by Y. Oshima in 8th July 2020
#ref(transfun_PZTamp.png,,50%);
** Output Noise [#s5a08570]
- Measured by Y. Oshima in 8th July 2020
#ref(noise_PZTamp.png,,50%);
** Notice [#udc7998c]
- This driver has 1st order low-pass with cutoff frequenc...
(2022.05.19. modified by Takano)
- An RC filter is inserted just before the outputs:~
(2021.11.11. added by Takano)
#ref(PZTamp_output.png,,8%);
** Pin assignment: [#o345dbec]
#ref(PZTamp_pins.jpg,,20%);
#ref(PZTamp_dsub-LEMO.png,,15%);
終了行:
[[AndoLabInstruments]]
* 6ch PZT Driver [#i9ad571f]
- 20 dB PZT driver with 6 channel
- Closed loop control is capable with an adequate actuator
** How to use [#n2dbcf3f]
This driver has 2 outputs, labelled with "PZT" and "MON"....
** Picture [#kb74584f]
#ref(picture_PZTamp.jpg,,10%);
** Transfer Function [#x3355914]
- Measured by Y. Oshima in 8th July 2020
#ref(transfun_PZTamp.png,,50%);
** Output Noise [#s5a08570]
- Measured by Y. Oshima in 8th July 2020
#ref(noise_PZTamp.png,,50%);
** Notice [#udc7998c]
- This driver has 1st order low-pass with cutoff frequenc...
(2022.05.19. modified by Takano)
- An RC filter is inserted just before the outputs:~
(2021.11.11. added by Takano)
#ref(PZTamp_output.png,,8%);
** Pin assignment: [#o345dbec]
#ref(PZTamp_pins.jpg,,20%);
#ref(PZTamp_dsub-LEMO.png,,15%);
ページ名:
![[PukiWiki]](image/pukiwiki.png "[PukiWiki]")
