#ref(): File not found: "Mag649.jpg" at page "AndoLabInstrumentsGeophone"
Just connect the cable to its output.
Response function from displacement to voltage:
#ref(): File not found: "response.png" at page "AndoLabInstrumentsGeophone"
#ref(): File not found: "response_plot.png" at page "AndoLabInstrumentsGeophone"
Parameters:
Label. | G | f0 | Q |
H1 | 249 | 1.071 | 1.81 |
H2 | 243.8 | 0.9491 | 1.705 |
H3 | 246 | 1.013 | 1.81 |
V1 | 255 | 1.013 | 1.739 |
V2 | 243.1 | 0.9819 | 1.746 |
V3 | 263.2 | 1.061 | 1.760 |
L-22E has two outputs and the actual signal is their differential, so you need to subtract one output to the other. except for this, everything is almost the same as L-4C.
Parameters:
Label. | G | f0 | Q |
GEO2 | 49.3 | 2.04 | 0.67 |
will be written someday.