AndoLabInstrumentsE610 のバックアップソース(No.2)

• バックアップ一覧
• 差分 を表示
• 現在との差分 を表示
• バックアップ を表示
• AndoLabInstrumentsE610 へ行く。
  • 1 (2020-07-20 (月) 13:36:07)
  • 2 (2020-07-20 (月) 14:00:58)
  • 3 (2021-11-11 (木) 17:20:46)
  • 4 (2021-11-15 (月) 17:35:05)

[[AndoLabInstruments]]
* 6ch PZT Driver [#i9ad571f]
- 20 dB PZT driver with 6 channel
- Closed loop control is capable with an adequate actuator

** How to use [#n2dbcf3f]
This driver has 2 outputs, labelled with "PZT" and "MON". Connect "PZT" output to a PZT, and connect "MON" output to an oscilloscope or a data logger. "MON" port outputs one hundredth of "PZT" port voltage. 

** Picture [#kb74584f]
#ref(picture_PZTamp.jpg,,10%);

** Transfer Function [#x3355914]
- Measured by Y. Oshima in 8th July 2020 
#ref(transfun_PZTamp.png,,50%);

** Output Noise [#s5a08570]
- Measured by Y. Oshima in 8th July 2020
#ref(noise_PZTamp.png,,50%);

** Notice [#udc7998c]
- This driver has 1st order low-pass with cutoff frequency 400 Hz. This driver adds 10 V offset to output. The range of output voltage is from - 30 V to 110 V.