AndoLabInstruments1chPZTDriver
をテンプレートにして作成
[
トップ
] [
新規
|
一覧
|
検索
|
最終更新
|
ヘルプ
|
ログイン
]
開始行:
[[AndoLabInstruments]]
* 1ch PZT Driver [#i9ad571f]
- 20 dB PZT driver with 1 channel
- Main module is [[PI E-610>https://www.pi-japan.jp/ja/pr...
This module is also used in [[6ch PZT Driver>AndoLabInstr...
** How to use [#n2dbcf3f]
+ Connect DC power. Default connector is HIROSE 4pin male...
+ Connect PZT to "OUT" port and apply the control voltage...
+ Offset is variable by adjusting a potentiometer "OFFSET...
+ Output voltage is [IN+OFFSET] x 10
+ "MON" port is a mirror of "OUT" port given by OUT / 100
** Picture [#kb74584f]
- Front
#ref(PZTamp_front.jpeg,,10%);
-Inside
#ref(PZTamp_inside.jpeg,,10%);
** Transfer Function [#x3355914]
-Measured by S. Takano on 10/11/2021
#ref(PZTamp_TF.png,,20%);
- Gain is 20dB for OUT, -20dB for MON
- 2 poles at 9.8kHz
** Output Noise [#s5a08570]
-Measured by S. Takano on 10/11/2021
#ref(PZTamp_noise.png,,20%);
** Notes [#t40f7335]
- I found there are glitches around 60MHz. If you don't l...
#ref(glitch.jpeg,,10%);
終了行:
[[AndoLabInstruments]]
* 1ch PZT Driver [#i9ad571f]
- 20 dB PZT driver with 1 channel
- Main module is [[PI E-610>https://www.pi-japan.jp/ja/pr...
This module is also used in [[6ch PZT Driver>AndoLabInstr...
** How to use [#n2dbcf3f]
+ Connect DC power. Default connector is HIROSE 4pin male...
+ Connect PZT to "OUT" port and apply the control voltage...
+ Offset is variable by adjusting a potentiometer "OFFSET...
+ Output voltage is [IN+OFFSET] x 10
+ "MON" port is a mirror of "OUT" port given by OUT / 100
** Picture [#kb74584f]
- Front
#ref(PZTamp_front.jpeg,,10%);
-Inside
#ref(PZTamp_inside.jpeg,,10%);
** Transfer Function [#x3355914]
-Measured by S. Takano on 10/11/2021
#ref(PZTamp_TF.png,,20%);
- Gain is 20dB for OUT, -20dB for MON
- 2 poles at 9.8kHz
** Output Noise [#s5a08570]
-Measured by S. Takano on 10/11/2021
#ref(PZTamp_noise.png,,20%);
** Notes [#t40f7335]
- I found there are glitches around 60MHz. If you don't l...
#ref(glitch.jpeg,,10%);
ページ名:
![[PukiWiki]](image/pukiwiki.png "[PukiWiki]")
