set thread_stack_size=204800;
set dcu_status_check=5;
set symm_gps_offset=2;
set debug=0;
set log=2;
set zero_bad_data=0;
set master_config="/opt/rtcds/kamioka/k1/target/fb/master";

configure channels begin end;

set gps_leaps = 820108813;
set detector_name="KAMIOKA";
set detector_prefix="K1";
set detector_longitude=-2.08407676917;
set detector_latitude=0.81079526383;
set detector_elevation=142.554;
set detector_azimuths=5.65487724844,4.08408092164;
set detector_altitudes=-0.0006195,0.0000125;
set detector_midpoints=1997.542,1997.522;

set num_dirs = 10;
set frames_per_dir=225;
set full_frames_per_file=1;
set full_frames_blocks_per_frame=32;
set frame_dir="/frames/full", "K-K1_C-", ".gwf";
#set science_frame_dir="/frames/science", "K-K1_R-", ".gwf";

set trend_num_dirs=10;
set trend_frames_per_dir=1440;
set trend_frame_dir= "/frames/trend/second", "K-K1_T-", ".gwf";

set raw-minute-trend-dir="/frames/trend/minute_raw";
set raw_minute_trend_saving_period=5;

set minute-trend-num-dirs=10;
set minute-trend-frames-per-dir=24;
set minute-trend-frame-dir="/frames/trend/minute", "K-K1_M-", ".gwf";

start main 30;
start profiler;

# comment out this block to stop saving data

start frame-saver;
sync frame-saver;
#start science-frame-saver;
#sync science-frame-saver;
start trender;
start trend profiler;
start trend-frame-saver;
sync trend-frame-saver;
start minute-trend-frame-saver;
sync minute-trend-frame-saver;
start raw-minute-trend-saver;

#start frame-writer "225.225.225.1" broadcast="192.168.1.0" all;
#start fast-writer "192.168.1.255" broadcast="192.168.1.0" all;
#sleep 5;

start producer;
#start epics dcu;
start epics server "K1:DAQ-FW1_" "K1:DAQ-FW1_";

start listener 8087;
#start listener 8088 1;
sleep 60;
clear crc;