Starting iocInit
cas warning: Configured TCP port was unavailable.
cas warning: Using dynamically assigned TCP port 10351,
cas warning: but now two or more servers share the same UDP port.
cas warning: Depending on your IP kernel this server may not be
cas warning: reachable with UDP unicast (a host's IP in EPICS_CA_ADDR_LIST)
iocRun: All initialization complete
#!../../bin/linux-x86_64/k1pico
## You may have to change k1pico to something else
## everywhere it appears in this file
< envPaths
epicsEnvSet("ARCH","linux-x86_64")
epicsEnvSet("IOC","iock1pico")
epicsEnvSet("TOP","/opt/rtcds/kamioka/k1/target/k1pico")
epicsEnvSet("EPICS_BASE","/opt/apps/linux-x86_64/epics/base")
cd /opt/rtcds/kamioka/k1/target/k1pico
## Register all support components
dbLoadDatabase "dbd/k1pico.dbd"
k1pico_registerRecordDeviceDriver pdbbase
## Load record instances
dbLoadTemplate "db/userHost.substitutions"
dbLoadRecords "db/dbSubExample.db", "user=controlsHost"
dbLoadRecords("db/pmepics.db", "site=K1")
## Set this to see messages from mySub
#var mySubDebug 1
## Run this to trace the stages of iocInit
#traceIocInit
cd /opt/rtcds/kamioka/k1/target/k1pico/iocBoot/iock1pico
iocInit
############################################################################
## EPICS R3.14.12.1 $Date: Tue 2011-04-26 15:36:19 -0500$
## EPICS Base built Sep 26 2011
############################################################################
## Start any sequence programs
#seq sncExample, "user=controlsHost"
[?1034hepics> Starting iocInit
cas warning: Configured TCP port was unavailable.
cas warning: Using dynamically assigned TCP port 59072,
cas warning: but now two or more servers share the same UDP port.
cas warning: Depending on your IP kernel this server may not be
cas warning: reachable with UDP unicast (a host's IP in EPICS_CA_ADDR_LIST)
iocRun: All initialization complete
#!../../bin/linux-x86_64/k1pico
## You may have to change k1pico to something else
## everywhere it appears in this file
< envPaths
epicsEnvSet("ARCH","linux-x86_64")
epicsEnvSet("IOC","iock1pico")
epicsEnvSet("TOP","/opt/rtcds/kamioka/k1/target/k1pico")
epicsEnvSet("EPICS_BASE","/opt/apps/linux-x86_64/epics/base")
cd /opt/rtcds/kamioka/k1/target/k1pico
## Register all support components
dbLoadDatabase "dbd/k1pico.dbd"
k1pico_registerRecordDeviceDriver pdbbase
## Load record instances
dbLoadTemplate "db/userHost.substitutions"
dbLoadRecords "db/dbSubExample.db", "user=controlsHost"
dbLoadRecords("db/pmepics.db", "site=K1")
## Set this to see messages from mySub
#var mySubDebug 1
## Run this to trace the stages of iocInit
#traceIocInit
cd /opt/rtcds/kamioka/k1/target/k1pico/iocBoot/iock1pico
iocInit
############################################################################
## EPICS R3.14.12.1 $Date: Tue 2011-04-26 15:36:19 -0500$
## EPICS Base built Sep 26 2011
############################################################################
## Start any sequence programs
#seq sncExample, "user=controlsHost"
[?1034hepics> Starting iocInit
cas warning: Configured TCP port was unavailable.
cas warning: Using dynamically assigned TCP port 30745,
cas warning: but now two or more servers share the same UDP port.
cas warning: Depending on your IP kernel this server may not be
cas warning: reachable with UDP unicast (a host's IP in EPICS_CA_ADDR_LIST)
iocRun: All initialization complete
#!../../bin/linux-x86_64/k1pico
## You may have to change k1pico to something else
## everywhere it appears in this file
< envPaths
epicsEnvSet("ARCH","linux-x86_64")
epicsEnvSet("IOC","iock1pico")
epicsEnvSet("TOP","/opt/rtcds/kamioka/k1/target/k1pico")
epicsEnvSet("EPICS_BASE","/opt/apps/linux-x86_64/epics/base")
cd /opt/rtcds/kamioka/k1/target/k1pico
## Register all support components
dbLoadDatabase "dbd/k1pico.dbd"
k1pico_registerRecordDeviceDriver pdbbase
## Load record instances
dbLoadTemplate "db/userHost.substitutions"
dbLoadRecords "db/dbSubExample.db", "user=controlsHost"
dbLoadRecords("db/pmepics.db", "site=K1")
## Set this to see messages from mySub
#var mySubDebug 1
## Run this to trace the stages of iocInit
#traceIocInit
cd /opt/rtcds/kamioka/k1/target/k1pico/iocBoot/iock1pico
iocInit
############################################################################
## EPICS R3.14.12.1 $Date: Tue 2011-04-26 15:36:19 -0500$
## EPICS Base built Sep 26 2011
############################################################################
## Start any sequence programs
#seq sncExample, "user=controlsHost"
[?1034hepics> Starting iocInit
cas warning: Configured TCP port was unavailable.
cas warning: Using dynamically assigned TCP port 51105,
cas warning: but now two or more servers share the same UDP port.
cas warning: Depending on your IP kernel this server may not be
cas warning: reachable with UDP unicast (a host's IP in EPICS_CA_ADDR_LIST)
iocRun: All initialization complete
#!../../bin/linux-x86_64/k1pico
## You may have to change k1pico to something else
## everywhere it appears in this file
< envPaths
epicsEnvSet("ARCH","linux-x86_64")
epicsEnvSet("IOC","iock1pico")
epicsEnvSet("TOP","/opt/rtcds/kamioka/k1/target/k1pico")
epicsEnvSet("EPICS_BASE","/opt/apps/linux-x86_64/epics/base")
cd /opt/rtcds/kamioka/k1/target/k1pico
## Register all support components
dbLoadDatabase "dbd/k1pico.dbd"
k1pico_registerRecordDeviceDriver pdbbase
## Load record instances
dbLoadTemplate "db/userHost.substitutions"
dbLoadRecords "db/dbSubExample.db", "user=controlsHost"
dbLoadRecords("db/pmepics.db", "site=K1")
## Set this to see messages from mySub
#var mySubDebug 1
## Run this to trace the stages of iocInit
#traceIocInit
cd /opt/rtcds/kamioka/k1/target/k1pico/iocBoot/iock1pico
iocInit
############################################################################
## EPICS R3.14.12.1 $Date: Tue 2011-04-26 15:36:19 -0500$
## EPICS Base built Sep 26 2011
############################################################################
## Start any sequence programs
#seq sncExample, "user=controlsHost"
[?1034hepics> Starting iocInit
cas warning: Configured TCP port was unavailable.
cas warning: Using dynamically assigned TCP port 32719,
cas warning: but now two or more servers share the same UDP port.
cas warning: Depending on your IP kernel this server may not be
cas warning: reachable with UDP unicast (a host's IP in EPICS_CA_ADDR_LIST)
iocRun: All initialization complete
#!../../bin/linux-x86_64/k1pico
## You may have to change k1pico to something else
## everywhere it appears in this file
< envPaths
epicsEnvSet("ARCH","linux-x86_64")
epicsEnvSet("IOC","iock1pico")
epicsEnvSet("TOP","/opt/rtcds/kamioka/k1/target/k1pico")
epicsEnvSet("EPICS_BASE","/opt/apps/linux-x86_64/epics/base")
cd /opt/rtcds/kamioka/k1/target/k1pico
## Register all support components
dbLoadDatabase "dbd/k1pico.dbd"
k1pico_registerRecordDeviceDriver pdbbase
## Load record instances
dbLoadTemplate "db/userHost.substitutions"
dbLoadRecords "db/dbSubExample.db", "user=controlsHost"
dbLoadRecords("db/pmepics.db", "site=K1")
## Set this to see messages from mySub
#var mySubDebug 1
## Run this to trace the stages of iocInit
#traceIocInit
cd /opt/rtcds/kamioka/k1/target/k1pico/iocBoot/iock1pico
iocInit
############################################################################
## EPICS R3.14.12.1 $Date: Tue 2011-04-26 15:36:19 -0500$
## EPICS Base built Sep 26 2011
############################################################################
## Start any sequence programs
#seq sncExample, "user=controlsHost"
[?1034hepics>