MX has 8 maximum end-points configured
263596
startup file interpreter thread tid=140121069611280
calling yyparse(4, 5)
[Fri Dec 11 10:38:11 2015] ->4: #enable fckrs
[Fri Dec 11 10:38:11 2015] ->4: set thread_stack_size=10240
[Fri Dec 11 10:38:11 2015] new threads will be created with the stack of size 10240K
[Fri Dec 11 10:38:11 2015] ->4: #set cit_40m=1
[Fri Dec 11 10:38:11 2015] ->4: set dcu_status_check=1
[Fri Dec 11 10:38:11 2015] ->4: #set symm_gps_offset=-1
[Fri Dec 11 10:38:11 2015] ->4: #set symm_gps_offset=315964803
[Fri Dec 11 10:38:11 2015] ->4: #set controller_dcu=22
[Fri Dec 11 10:38:11 2015] ->4: set debug=0
[Fri Dec 11 10:38:11 2015] ->4: set log=2
[Fri Dec 11 10:38:11 2015] ->4: set zero_bad_data=0
[Fri Dec 11 10:38:11 2015] ->4: set master_config="/opt/rtcds/kamioka/k1/target/fb/master"
[Fri Dec 11 10:38:11 2015] finished configuring data channels
[Fri Dec 11 10:38:11 2015] ->4: configure channels begin end
[Fri Dec 11 10:38:11 2015] ->4: #tpconfig "/opt/rtcds/lho/h1/target/gds/param/testpoint.par"
[Fri Dec 11 10:38:11 2015] ->4: set gps_leaps = 820108813
[Fri Dec 11 10:38:11 2015] ->4: set detector_name="KAMIOKA"
[Fri Dec 11 10:38:11 2015] ->4: set detector_prefix="K1"
[Fri Dec 11 10:38:11 2015] ->4: set detector_longitude=-90.7742403889
[Fri Dec 11 10:38:11 2015] ->4: set detector_latitude=30.5628943337
[Fri Dec 11 10:38:11 2015] ->4: set detector_elevation=.0
[Fri Dec 11 10:38:11 2015] ->4: set detector_azimuths=1.1,4.7123889804
[Fri Dec 11 10:38:11 2015] ->4: set detector_altitudes=1.0,2.0
[Fri Dec 11 10:38:11 2015] ->4: set detector_midpoints=2000.0, 2000.0
[Fri Dec 11 10:38:11 2015] Frame file wiper cannot be enabled when gps_time_dirs==1
Write external script to clean up old frame files

[Fri Dec 11 10:38:11 2015] frame wiper enabled
[Fri Dec 11 10:38:11 2015] ->4: enable frame_wiper
[Fri Dec 11 10:38:11 2015] ->4: set num_dirs = 10
[Fri Dec 11 10:38:11 2015] ->4: set frames_per_dir=225
[Fri Dec 11 10:38:11 2015] ->4: set full_frames_per_file=1
[Fri Dec 11 10:38:11 2015] ->4: set full_frames_blocks_per_frame=32
[Fri Dec 11 10:38:11 2015] ->4: set frame_dir="/frames/full/data", "M-R-", ".gwf"
[Fri Dec 11 10:38:11 2015] ->4: scan frames
[Fri Dec 11 10:38:11 2015] Frame file wiper cannot be enabled when gps_time_dirs==1
Write external script to clean up old frame files

[Fri Dec 11 10:38:11 2015] trend frame wiper enabled
[Fri Dec 11 10:38:11 2015] ->4: enable trend_frame_wiper
[Fri Dec 11 10:38:11 2015] ->4: set trend_num_dirs=10
[Fri Dec 11 10:38:11 2015] ->4: set trend_frames_per_dir=1440
[Fri Dec 11 10:38:11 2015] ->4: set trend_frame_dir= "/frames/trend/second/data", "M-T-", ".gwf"
[Fri Dec 11 10:38:11 2015] ->4: set raw-minute-trend-dir="/frames/trend/minute_raw"
[Fri Dec 11 10:38:11 2015] ->4: #set nds-jobs-dir="/opt/fb"
[Fri Dec 11 10:38:11 2015] ->4: set nds-jobs-dir="/opt/rtcds/kamioka/k1/target/fb/jobs"
[Fri Dec 11 10:38:11 2015] Frame file wiper cannot be enabled when gps_time_dirs==1
Write external script to clean up old frame files

[Fri Dec 11 10:38:11 2015] minute trend frame wiper enabled
[Fri Dec 11 10:38:11 2015] ->4: enable minute-trend-frame-wiper
[Fri Dec 11 10:38:11 2015] ->4: set minute-trend-num-dirs=10
[Fri Dec 11 10:38:11 2015] ->4: set minute-trend-frames-per-dir=24
[Fri Dec 11 10:38:11 2015] ->4: set minute-trend-frame-dir="/frames/trend/minute/data", "M-M-", ".gwf"
[Fri Dec 11 10:38:11 2015] ->4: #set minute-trend-frame-dir="/frames/trend/minute", "M-M-", ".gwf"
[Fri Dec 11 10:38:11 2015] ->4: scan minute-trend-frames
[Fri Dec 11 10:38:11 2015] ->4: scan trend-frames
[Fri Dec 11 10:38:11 2015] ->4: scan frames
[Fri Dec 11 10:38:11 2015] ->4: start main 20
[Fri Dec 11 10:38:12 2015] main started
[Fri Dec 11 10:38:12 2015] ->4: start profiler
[Fri Dec 11 10:38:12 2015] ->4: # comment out this block to stop saving data
[Fri Dec 11 10:38:12 2015] ->4: #start fast-writer "10.68.10.255" broadcast="10.68.10.0" all
[Fri Dec 11 10:38:12 2015] ->4: start fast-writer "192.168.1.255" broadcast="192.168.1.0" all
[Fri Dec 11 10:38:12 2015] no_average=1

[Fri Dec 11 10:38:12 2015] framexmit connected to 192.168.1.255
started
writer id: 530961296
[Fri Dec 11 10:38:12 2015] producer started
[Fri Dec 11 10:38:12 2015] ->4: start producer
[Fri Dec 11 10:38:12 2015] ->4: start epics dcu
[Fri Dec 11 10:38:12 2015] edcu started
[Fri Dec 11 10:38:12 2015] EDCU has 5111 channels configured; first=0

[Fri Dec 11 10:38:12 2015] ->4: start epics server "K1:DAQ-DC0_" "K1:DAQ-DC0_"
[Fri Dec 11 10:38:12 2015] epics server started
[Fri Dec 11 10:38:12 2015] Epics server started
[Fri Dec 11 10:38:12 2015] ->4: start listener 8087
[Fri Dec 11 10:38:12 2015] ->4: start listener 8088 1
[Fri Dec 11 10:38:12 2015] ->4: sleep 60

Session terminated, killing shell... ...killed.